Tools:
- Spray bottle with soapy liquid (a few drops of dish washing lidquid per 8oz of water).
- Squeegee
- Knife/scissors (optional)

Step 1:
- Clean the area.

Step 2:
- Spray solution onto area.

Step 3:
- Spray solution onto the adhesive part of the film.

Step 4:
- Apply the film on the the door edge, move it around until you have positioned it to your liking.

Step 5:
- Once it’s in position, use the squeegee to gently push out the bubbles. Go over the area several times, and apply a little more pressure each time to remove all bubbles.  It’s okay if it’s not perfect, the water will eventually evaporate and the bubbles will be gone.

Step 6:
- Fold the excess film, and also gently push out the bubbles.

Can you see it?

You’re done!