ScratchOn ™

Invisible scratch and paint protection.

Technical Data

Clear protection film

Peeling Adhesion:
180 degrees on stainless steel
After 30 minutes - 4lbs
After 1 week - 5.7lbs

Face material data, 68 degrees Fahrenheit:
Tensile strength - greater than 8.6lbs
Elongation % at break - greater than 150%

Dimensional Stability (shrinkage):
48 hours at 158 degrees Fahrenheit bonded to aluminum - less than .01

Temperature ranges:
Application - 45 to 104 degrees Fahrenheit
End use - minus 40 to 194 degrees Fahrenheit

Flammability:
Sample mounted on aluminum - Self extinguishing

Chemical resistance:
Water (24hrs immersed) - Excellent
5% Detergent (24hrs immersed) - Excellent
10% Hydrochoric Acid (24hrs immersed) - Excellent
10% Sulfuric Acid (24hrs immersed) - Excellent
10% Phosphoric Acid (24hrs immersed) - Good/Excellent
10% Sodium Hydroxide (24hrs immersed) - Excellent
10% Ammonium Hydroxide (24hrs immersed) - Excellent
Ethylene Glycol (24hrs immersed) - Excellent
Methanol (1hr immersed) - Good
SAE 10W30 Oil (24hrs immersed) - Excellent
Low octane fuel (spray on) - Good
High octane fuel (spray on) - Good

Durability:
White and black - 8 years outdoor
All other colors - 7 years out door

This use-life estimate is based upon accelerated age studies based on industry standard vertical application under normal temperature.

 

Colored protection film

Dimensional Stability
(FINAT-TM 14) adhered to steel, no shrinkage in cross direction; in length <.016″

Temperature Resistance
adhered to acrylic, -40°F to +176°F no variation

Adhesive Power
(FINAT-TM 1, after 24 h) adhered to acrylic: min. 4.1 lb/in2; adhered to glass: min 3.7 lb/in2

Minimum application temperature
+46°F

Outdoor Durability
5 years (based on industry standard vertical surface exposure)

Elongation at break (across)
(DIN EN ISO 527) min. 150%

Elongation at break (along)
(DIN EN ISO 527) min. 130%

Tensile Strength (across)
(DIN EN ISO 527) min. 19 MPa

Tensile Strength (along)
(DIN EN ISO 527) min. 19 MPa

Resistance to solvents and chemicals
adhered to acrylic, after 8 h in washalcalics (0.5% household-cleaning agents) at room temperature and 149 °F no variation